FACTS about your Weather Station

Having problem with your WS-001 weather station? Some of us might think that we only wasted our money in buying a weather station just to found out that it's defective. While in reality your unit is not defective at all, it just needed some troubleshooting for it to work and function normally. Join me to explore and gain some more knowledge on how to properly operate your weather station without troubling yourself in contacting the seller.

Here are some FACT about WS-001 that you might think it is defective:

*When the WS-001 weather station is receiving RCC signal pressing of button especially the back light will not work. You can only press the buttons after the main unit finished receiving RCC signal.

* You have to wait for at least 15-30 minutes for the main unit to completely receive the RCC signal.

* This unit usually receives signal during midnight and morning.

* The sensor is use for outdoor temperature and the main unit is for the indoor temperature measurement only.

* It is normal for your barometric pressure to not change value for an hour.

* The moon phase of WS-001 with new moon and full moon is reversed. Most of the buyers of this item thinks that their weather station is defective because of the reverse moon phase. Well it is not defective; this is the normal and real function of the item.

While here are the trouble shooting you can do by your own.

1. Having problem with the sensor not transmitting data to the main unit or the main unit is not receiving any data from the sensor?

    1.1. First, you have to replace the battery of the main unit and sensor with brand new. Double check the red LED at the sensor if it is lighting up.

    1.2. Place the faulty sensor and the main unit beside each other for overnight and set the both unit (main unit and sensor) in the same channel (1-1, 2-2, 3-3 channels) try to set both unit to all channel then observe if the problem will still persist.

    1.3. If the problem has been resolved after placing them close to each other, it means there are some inferences where you placed the sensor and the main unit.

    1.4. If the problem wasn't resolved by following my recommendations above. I recommend that you to contact the seller of the item for resolution.

2. Having problem with the synchronization of your standard time/ receiving RCC signal?

    2.1. Unplug and re-plug your power supply and wait for at least 10 minutes to receive the RCC signal.

    2.2. You need to check if you input the correct time zone at your place.

    2.2. If the problem still persist, then you may contact your seller to ask for better resolution.

3. Are there some segments missing in the display of your main unit or sensor?

    3.1. Try to replace the battery first with brand new. If the problem still persist after replacing the battery. It is better to contact your seller for a better resolution.

4. The back light of your main unit is not turning on even after receiving RCC signal?

    4.1. Try to use the adapter as power supply of your unit and check if back light will work. When using the adapter as power supply the back light will turn on all the time.

    4.2. If the problem still persist, try to plug the unit to a different socket, maybe there's just a problem with the present socket you're using.

This are just some of the problem we might encounter with our WS-001 weather station. If after trying all my suggestion in this page and the problem wasn't resolved, it will be better to contact your seller for them to provide a better resolution to your problem. I hope that while reading this page you learned some tips on how to resolve your problem with your item by yourselves.

You may share your thoughts with us. If you have any questions and clarifications about this topic, you may leave your questions at the comment box. We will try our best to answer all your questions and provide additional information you needed.